If you need help with anything else please check out our other guides or get in contact. Repeat these steps for the rest of the cameras you should find they all are added to the NVR now. Password will be the one you set on the NVR.Change the IP address of the camera to the one you are adding (192.168.254.20 for example).Change the channel from the Plug-and-Play to Manual adding.Now one by one edit the following channels for cameras which are showing as disconnected: On your NVR go to Menu > Camera > IP Camera.Ĭheck the status list and make a note of the IP address of any camera showing connected.Ĭross off these cameras IP address from the first list you made. Step 4: Gather camera information for any video feeds not showing up Type the password in for the camera in the box at the bottom and click Modify. Some trouble with onvif support on Hikvision DS-2CD833.Now alter the xxx digits of the IP address to be different to the rest of your cameras, for example, the updated address would read 192.168.254.20.Put a tick on the left to select the camera you want to change.If you have several cameras on the same IP address you will want to change these with the below steps: They should look something like ( the last section of numbers being different).Make a note of all the IP addresses that you see on the list.You should see a list of all the devices attached now.With your computer connected to the same network, open the SADP Tool.Connect your Hikvision NVR to your network router using a network cable.Step 2: Check your cameras are being detected In this guide, we take you through how to add multiple Hikvision IP cameras to a recorder where the cameras are routed through a network switch and/or wireless bridge.įirst of all, download and install the SADP Tool from the link below onto your Windows PC.

Hikvision onvif port